DEWENWILS 200W Low Voltage Transformer with Timer and Photocell Sensor, 120V AC to 12V/14V AC, for Spotlight, Pathway Light-HOSL04H

【Dusk to Dawn Sensor】 The 200W Low Voltage Transformer is a convenient and reliable solution for all your outdoor lighting needs. It features a detachable photocell sensor and 6ft power cord, making it easy to install both indoors and outdoors. This transformer is compatible with all 12V/14V low voltage LED and halogen landscape lighting.

【5 Timing Modes】The 200W Low Voltage Transformer is designed with 5 modes, including Manual ON/OFF, AUTO ON/OFF, Photocell ON/timer OFF, timer ON/OFF, and TEST, making it easy to operate with a push of a button. This feature allows you to customize your lighting system and maximize energy savings. With its sleek and user-friendly design, this transformer is a practical solution for all your outdoor lighting needs.

【Weatherproof & Safe 】This 200W low voltage transformer is made of high-quality metal material, designed to resist rain, snow, dust, and corrosion. It is suitable for both indoor and outdoor use, and features a manual reset circuit breaker that automatically trips when overloaded, ensuring safety and protection. The transformer is ETL listed for quality and safety assurance, providing a reliable solution for all your outdoor lighting needs.

【Easy to Use & Memory Function】The 200W low voltage transformer is easy to set up with MENU, ▲▼, and ENTER keys. It has a memory function and built-in hanging holes for direct mounting on outside walls. Trust this transformer for reliable outdoor lighting customization.

【Wide Application】This 200W transformer converts 120V AC to 12V/14V AC, ensuring safety for compatible LED and halogen landscape lighting. Versatile for outdoor uplights, string lights, garden decor, porch lights, and water features. Trust this transformer for reliable lighting performance.

(1) If the transformer does not connect with load, it shows no output at terminals. Please check your lights are connected or not before mearsuring voltage.

(2) Any longer than 150ft cable per tap is not recommended for connecting with DEWENWILS Low Voltage Transformer.

(3) The transformer has a power-off memory function.When the transformerpowers on again, the transformer will enter the working mode before thepower failure.

(4) Circuit breaker may need to be reset if the transformer is not working.

landscape transformer with timer

1.Calculate the total wattage of your light fixtures in your plan.

2.Choose the transformer that is large enough to support the total wattage you need.

For example: if you have 7 pack 13W landscape lights, so the total wattage is 91W. Then you can choose the transformer higher than 91W.

Specifications:
Output: 12VAC/14VAC
Input: 120VAC, 60Hz
Max Power Rating: 200W

Packing List:
1× Low-Voltage Transformer
3 x Screws
3 x Wall Anchors
1 x Photo Sensor Bracket
1 x Photo Sensor
1x Instruction Manual

To set AUTO ON/OFF Model

Press the MENU button to select AUTO ON/OFF. The green light will illuminate and the display will flash,press ENTER button. The landscape lights will automatically turn on at night and off at daylight. No other additional setup is required. By the way, there is a 30 second delay from when the photo sensor determines darkness and the transformer turns on.

To set the clock

Notice: Set the current time of the tranformer same as your mobile before setting the PHOTO ON, TIMER OFF model and TIMER ON, TIMER OFF model. For example, the current time is 7:10 AM. Press the MENU button to change the CLOCK,press ENTER. The AM and PM lights will flash, Push the up buttons to select AM, press enter, Next the hour position will flash, Press the up/down button to djust the hour to 7, press enter, Now the minute position will flash, same as hours , The current time of 7:10 AM is now display. And the clock model is now set.

To set PHOTO ON, TIMER OFF

Your would use this setting make your lights to turn on at night and off at a time you choosing. For example, we want the landscape light will turn on at nightfall, turn off at 11:30 PM.Press the MENU button until the green light is on PHOTO ON, TIMER OFF model,press ENTER.The display will show OFF, press ENTER. The AM and PM lights will flash. Push the down buttons to set the time same as the clock setting. The current time of 11:30 PM is now display. The photo on, timer off model is set.

TEST Model

Use this mode to test the photo sensor and transformer operation. Covering the photo eye turns on the transformer. Uncovering the photosensor during the daytime or shining a bright light onto the photo sensor willturn off the transformer. Note: there is no 30 seconds delay in this mode.